Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

error in geometry drawing

Please login with a confirmed email address before reporting spam

Hi,
I use Matlab for my simulations and now I discovered what is causing errors. I attached my m-file and comsol file (at least when I start it then I cannot see all elements, I have to click on electrostatics or some other menus to see everything).
In my simulation I draw many small cylindrical elements. As long I draw them horizontally or vertical everything works fine, but if I want to draw the element with 45 degree angle then I get error. I don't understand the reason. Have somebody had similar issue?


1 Reply Last Post 15.01.2011, 16:32 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 15.01.2011, 16:32 GMT-5
Hi

indeed your mph file seems corrupt, I get only error messages and cannot identify cleary why

--
Good luck
Ivar
Hi indeed your mph file seems corrupt, I get only error messages and cannot identify cleary why -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.