Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Transient and stationary case together
Posted 30.12.2010, 15:13 GMT-5 1 Reply
Please login with a confirmed email address before reporting spam
in coupled multimodes, is it possible to work transient and stationary cases together, ie. some of modules are in transient while the other/others in stationary. By the way, stationary module solution depends on the transient results and vice versa.
1 Reply Last Post 31.12.2010, 01:07 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
you need to set up multiple solvers, in the right order, and possibly adapt the solver sequence manually (typically by using segregated steps) these manual tunings can only be done by a human, as COMSOL cannot guess (yet?) all combinations of complex multiphyiscs cases
This is working far easier and better in v4.1 than in the first v4.0 version (and w.r.t. 3.5a too) so get hand on latest version
--
Good luck
Ivar
you need to set up multiple solvers, in the right order, and possibly adapt the solver sequence manually (typically by using segregated steps) these manual tunings can only be done by a human, as COMSOL cannot guess (yet?) all combinations of complex multiphyiscs cases
This is working far easier and better in v4.1 than in the first v4.0 version (and w.r.t. 3.5a too) so get hand on latest version
--
Good luck
Ivar