Menu

Discussion Forum

New Discussion
Filtern

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

2D Geometry

Posted 24.12.2010, 08:55 GMT-5 Version 3.5a 1 Reply

Adnan Haider Noor
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all, hello!

I am working on the 2d fluid dynamics module. I have a particular width and length profile. Now i need to add a constant depth information as well in my model. Is it possible to add constant depth information in a 2d model. If yes, how?

Thanks alot for your help.

Regards,
Adnan Haider
Germany
1 Reply Last Post 25.12.2010, 05:15 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 25.12.2010, 05:15 GMT-5
Hi

in 3.5a you should have the "Thickness" parameter in the domains window. In v4 there is a sub-node normally to adapt, per domain if required

--
Good luck
Ivar
Hi in 3.5a you should have the "Thickness" parameter in the domains window. In v4 there is a sub-node normally to adapt, per domain if required -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content