Menu

Discussion Forum

New Discussion
Filtern

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Re-mesh an imported mesh file

Posted 17.11.2010, 15:54 GMT-5 4 Replies

Rami Tzafriri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I have imported a .mphtxt file (containing a 3D geometry) into COMSOL 3.5 and tried to re-mesh all the sub-domains.

However, COMSOL gives me an error - "Error: 4121. Cannot remesh imported mesh".

Is there anyway I could do this operation?

Thanks.
4 Replies Last Post 23.11.2010, 00:16 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 18.11.2010, 05:25 GMT-5
Hi

traditional FEM tools work a lot on mesh as the geoemtrical base, COMSOL does not, you should ideall try to import geometries, or try to have 3.5a to generate a geoemtry from your mesh and then export/import the geoemtry, then remesh in V4

--
Good luck
Ivar
Hi traditional FEM tools work a lot on mesh as the geoemtrical base, COMSOL does not, you should ideall try to import geometries, or try to have 3.5a to generate a geoemtry from your mesh and then export/import the geoemtry, then remesh in V4 -- Good luck Ivar
Rami Tzafriri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 22.11.2010, 09:23 GMT-5
Hello,

Thank you for the reply.

Can you please suggest as to how I can create geometry from the mesh file in 3.5a?

Hello, Thank you for the reply. Can you please suggest as to how I can create geometry from the mesh file in 3.5a?
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 22.11.2010, 15:08 GMT-5
Hi

take a read in the doc, i.e. chapter on "Creating a Geometry from a Mesh" p369 in guide.pdf for 3.5a.

It really worth to "index" your pdf files and run a search on them, most answers are therein

--
Good luck
Ivar
Hi take a read in the doc, i.e. chapter on "Creating a Geometry from a Mesh" p369 in guide.pdf for 3.5a. It really worth to "index" your pdf files and run a search on them, most answers are therein -- Good luck Ivar
Rami Tzafriri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 23.11.2010, 00:16 GMT-5
Thank you very much.
Thank you very much.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content