Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Anisotropic material properties in cylindrical coordinates
Posted 12.01.2016, 08:11 GMT-5 Heat Transfer & Phase Change, Geometry, Materials Version 5.2 1 Reply
Please login with a confirmed email address before reporting spam
I am building a 3D model where there are several cylinders, placed in several locations, with an anisotropic thermal conduction in cylindrical coordinates. For example, each cylinder has a large thermal resistance in the R-direction and a low thermal resistance in the Phi- and Z-direction.
I have defined a separate cylindrical coordinate system for each of the cylinders: sys2, sys3, sys4... etc. How can I link these coordinate systems to the anisotropic material properties of parts?
I have defined a separate cylindrical coordinate system for each of the cylinders: sys2, sys3, sys4... etc. How can I link these coordinate systems to the anisotropic material properties of parts?
1 Reply Last Post 15.01.2016, 07:40 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Dear Tim,
Thank you for your post in this forum, however I advise you to send an email to "support@comsol.com". Please bear in mind that you have to provide a legal license key in order to receive support.
Best regards,
Francois Mandias
Thank you for your post in this forum, however I advise you to send an email to "support@comsol.com". Please bear in mind that you have to provide a legal license key in order to receive support.
Best regards,
Francois Mandias